The Woodstock Customer Service and Technical Support Teams are U.S. This keeps the work surface clear of obstructions when not in use. T-Slot Tracks are available in three lengths and are designed to be mounted flush to the work surface. This flush-mounted T-Slot Track is 3/8' deep x 3/4' wide. The Woodstock Customer Service and Technical Support Teams are U.S. Shop Fox D2724 - 24' Aluminum T-Slot Track. Like all Shop Fox clamps, the D3347 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. These cam clamps are low profile, leaving the top of your project unobstructed, which is why these clamps are a favorite for CNC machining operations.
Use them to mount your shop-made faceplates and larger chuck. These are the studs and nuts you need to mount a 3' 4-jaw chuck on the mini lathe. Two 8 mm T-slots 25 mm center to center Mounts QCTP or standard 4-way tool. Simply position the clamp by unthreading the t-slot nut on the bottom until the clamp slides smoothly in the t-slot, then position the clamp up to the workpiece and rotate the clamping lever into position. Videos, Books and Seminars: Machinist Books Videos, Books and Seminars: Other Books. Once the work is complete, the steel jaw retracts thanks to an internal spring tension. w1846 1i1n8trnoi doru81uoun1 w1tcrn1 wo.182 8r.ua.ow83 introduction. The D3347 Cam Clamp offers point-of-use clamping power for 5/16' t-slot tracks thanks to the eccentric cam design.Īs the cam is rotated, it presses the hardened-steel jaw into position on the workpiece. t want it to stick or ' seize ' in the slot, don't neglect to either oil it or graphite it, before driving it home.
